MAXGUARD TN SA – IZO/NPG

Topcoat made of IZO/NPG resin, with excellent mechanical properties and maximum resistance to weather conditions and UV radiation.

Intended for spraying.

Brookfield viscosity at 23°C (10 rpm) – 7000 mPas,
Viscosity (plate and cone) at 23°C – 270 mPas,
Gelling time at 23°C (2.0% MEKP–50) – 7 min.

Available on backorder

Maxguard TN SA is a general purpose topcoat with excellent mechanical properties and maximum resistance to weather conditions and UV radiation.

It is based on IZO/NPG resin.

The SA version is suitable for spraying.

Recommendations:

mix the topcoat thoroughly before use,
temperature of the room, raw materials and tools used should be within the range of 18 – 25°C, with relative humidity below 70%,
amount of catalyst used (MEKP) should be within the range of 1.5 – 2.5%,
thickness of the layer of topcoat applied should be within the range of 600 – 1000 µm.

Maxguard TN SA meets the requirements of classification associations such as Det Norske Veritas, Lloyd’s Register of Shipping and Germanischer Lloyd for the construction of small vessels.

C-L Sp. z o.o. has the possibility to produce topcoats in any colour of the RAL and INSTINT pallets.

The minimum number of orders from the aforementioned colour pallets is 1 hob (approx. 20 kg).

Ask about product

MAXGUARD TN SA – IZO/NPG