Highest class gelcoat made of IZO/NPG resin, with excellent mechanical properties and maximum resistance to weather conditions and UV radiation.

Developed on the basis of LE technology – about 50% lower emissions of volatile organic substances.

Intended for manual application

  • Brookfield viscosity RV5 (10 rpm) at 23°C – 15000 mPas,
  • Viscosity (plate and cone) at 23°C – 850 mPas,
  • Gelling time at 23°C (2.0% MEKP–50) – 18 min.

Available on backorder

Maxguard NP HA is a top quality gelcoat that combines the properties of low emission volatile organic substances with excellent processing properties.

The special LE technology developed by Ashland reduces VOC emissions by about 50%. This means both improved working conditions and lower gelcoat consumption.

Maxguard NP gelcoat gives the product the highest resistance to UV radiation and osmosis and has excellent mechanical properties.

It is produced on the basis of IZO/NPG resin.

The HA version is suitable for manual application.


  • The gelcoat should be thoroughly mixed before use,
  • temperature of the room, raw materials and tools used should be within the range of 18 – 25°C, with relative humidity below 70%,
  • amount of catalyst used (MEKP) should be within the range of 1.5 – 2.5%,
  • the thickness of the layer of gelcoat applied should be within the range of 600 – 1000 µm.

Maxguard NP meets the requirements of insurance associations such as Det Norske Veritas and Lloyd’s Register of Shipping for the construction of small vessels.

C-L Sp. z o.o. has the possibility to produce gelcoat in any colour of the RAL and INSTINT pallets.

The minimum number of orders from the aforementioned colour pallets is 1 hob (approx. 20 kg).

Customers rewievs (0)

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Ask about product


    * required fields